Representative photoWheel alignment for a 2007 Volvo VT
Wheel alignment for the 2007 Volvo VT: CarmaCars does not do this work itself. Request it and we arrange it with a trusted shop or connect you with one, and we can deliver a rental car to you while yours is in.
A rental while yours is in the shop
CarmaCars does not do this work; you keep driving while the shop has your car. We deliver a rental to you, by the day, at our usual rates.
What to check when buying the 2007 Volvo VT
- NHTSA lists 9 recall campaigns for this model year. Ask the seller for proof each one was fixed; a dealer can check it by the VIN.
- Owners filed 1 complaint with NHTSA, most often about visibility (1). Have those parts checked before you buy.
| Campaign | Date | Component | Summary |
|---|---|---|---|
| 13V268000 | 2013-06-26 | power train:clutch assembly | Volvo Trucks North America (Volvo) is recalling certain model year 2007-2014 VAH, VHD, VNL, VNM, and VT models. The affected vehicles were built without a redundant clutch disengagement switch. Without a redundant switch, a loss of signal from the brake air pressure switch can prevent the clutch from automatically... |
| 10V571000 | 2010-11-12 | service brakes, air:supply:quick release valve | VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS... |
| 09V173000 | 2009-05-21 | visibility:windshield wiper/washer:motor | VOLVO TRUCKS IS RECALLING 127,764 MY 2001-2008 VHD, VNL, VNM, AND MY 2005-2008 VT TRUCKS. A SEAL MAY FAIL ALLOWING WATER AND CONTAMINANTS TO SEEP INTO THE WINDSHIELD WIPER MOTOR. |
| 07V573000 | 2007-12-14 | electrical system:wiring:fuses and circuit breakers | ON CERTAIN HEAVY DUTY TRUCKS, THE CIRCUIT PROTECTION (I.E. AUTOMATIC CIRCUIT BREAKERS) USED TO PROTECT THE VEHICLE LIGHTING SYSTEM MAY NOT PROVIDE ADEQUATE PROTECTION. |
| 07V496000 | 2007-10-23 | trailer hitches:fifth wheel assembly | ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN. |
| 07V345000 | 2007-08-07 | fuel system, diesel | ON CERTAIN TRUCKS, AN UNPROTECTED LEAD IN THE THERMOSWITCH OF THE HEATER MAY MAKE CONTACT WITH ANOTHER POST POSSIBLY CREATING A SHORT CIRCUIT, WHICH CAN RESULT IN CONTINUOUS OPERATION OF THE HEATING ELEMENT. |
| 07V323000 | 2007-07-24 | steering | ON CERTAIN TRUCKS, THE NUT USED TO RETAIN THE STEERING SHAFT MAY OR MAY NOT BE A LOCK NUT THAT HAS THE LOCKING FEATURE. A LOCK NUT IS REQUIRED TO PROVIDE ADDITIONAL RESISTANCE TO ENSURE THAT THE NUT DOES NOT COME LOOSE. |
| 06V385000 | 2006-10-11 | power train:driveline | ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR RPL20 HIGH ANGLE INTERAXLE DRIVESHAFTS, AN IMPROPER SEATED OR MISSING SNAP RING CAN RESULT IN THE BEARING CUP TO SEPARATE FROM THE SLIP YOKE SUB-ASSEMBLY. THE UNIVERSAL JOINT CROSS COULD THEN CONTACT THE SLIP YOKE CASTING AND EVENTUALLY CAUSE THE EAR WORK TO FRACTURE. |
| 06V099000 | 2006-04-04 | steering:gear box:shaft sector | ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH DANA STEERING SHAFTS, THERE IS A POTENTIAL THAT THE STEERING SHAFT PINCH BOLT HOLE MAY BE INCORRECTLY LOCATED. THE PINCH BOLT FITS INTO A GROOVE IN THE STEERING GEAR INPUT SHAFT TO ENSURE THAT THE STEERING SHAFT DOES NOT SEPARATE FROM THE STEERING GEAR IF THE PINCH... |
Source: NHTSA (US) recall campaigns and owner complaints for this model year.
Arranging the work for the VT
Wheel alignment for the 2007 Volvo VT: the work is done by a shop we trust, never by CarmaCars. Hitting a pothole hard can knock the wheels out of line.
Details the shop needs
Say whether the car is drivable; it changes how it gets to the shop. Tell the shop about any warning light or sound you have noticed. If you have the service history of your VT, have it ready for the shop.
What we arrange
You agree the price with the shop before any work starts. We keep you posted until the car is booked in. You approve the shop's quote before any work.
Your rental while you wait
A rental from us keeps you moving while the shop has your car. Add a rental to the same request as the repair. Your offer shows the delivery fee if you want the car brought to you.
Talking to the shop
If the car must stay overnight, ask where it will be kept. Ask whether the shop needs your keys, the wheel lock key or the spare. Ask if the shop needs the car for a full day or only a few hours.
Small things that help
Keep the fuel tank above a quarter in winter. Clear snow off the whole car, roof included, before you drive. Check the tire pressure once a month, when the tires are cold.
Get an offer
Need the work and a rental? One request covers both.
Request wheel alignment
Tell us when suits you. A person replies within one business day and arranges it with a trusted shop or recommends one; the shop sets its own price and time.
Rent a car while yours is in in Toronto
We have no car while yours is in on the site right now. Request one and we look for it for your dates, or take a similar car that is available now.
Similar cars available now
- Representative photo
Checking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Want this exact car?
Tell us your dates and we look for a car while yours is in for you. Nothing is booked or charged.