Engine repair for a 2007 Volvo VT
Engine repair for the 2007 Volvo VT: CarmaCars does not do this work itself. Request it and we arrange it with a trusted shop or connect you with one, and we can deliver a rental car to you while yours is in.
A rental while yours is in the shop
CarmaCars does not do this work; you keep driving while the shop has your car. We deliver a rental to you, by the day, at our usual rates.
What to check when buying the 2007 Volvo VT
- NHTSA lists 9 recall campaigns for this model year. Ask the seller for proof each one was fixed; a dealer can check it by the VIN.
- Owners filed 1 complaint with NHTSA, most often about visibility (1). Have those parts checked before you buy.
| Campaign | Date | Component | Summary |
|---|---|---|---|
| 13V268000 | 2013-06-26 | power train:clutch assembly | Volvo Trucks North America (Volvo) is recalling certain model year 2007-2014 VAH, VHD, VNL, VNM, and VT models. The affected vehicles were built without a redundant clutch disengagement switch. Without a redundant switch, a loss of signal from the brake air pressure switch can prevent the clutch from automatically... |
| 10V571000 | 2010-11-12 | service brakes, air:supply:quick release valve | VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2007 AND 2009 VHD, MODEL YEAR 2006 THROUGH 2010 VN, AND MODEL YEAR 2007 THROUGH 2009 VT TRUCKS MANUFACTURED FROM NOVEMBER 7, 2005, THROUGH OCTOBER 30, 2009, EQUIPPED WITH AN AIR RELEASE FIFTH WHEEL. THE INVERSION VALVE ON THE FRAME MAY BE ORIENTATED WHERE CONTAMINANTS... |
| 09V173000 | 2009-05-21 | visibility:windshield wiper/washer:motor | VOLVO TRUCKS IS RECALLING 127,764 MY 2001-2008 VHD, VNL, VNM, AND MY 2005-2008 VT TRUCKS. A SEAL MAY FAIL ALLOWING WATER AND CONTAMINANTS TO SEEP INTO THE WINDSHIELD WIPER MOTOR. |
| 07V573000 | 2007-12-14 | electrical system:wiring:fuses and circuit breakers | ON CERTAIN HEAVY DUTY TRUCKS, THE CIRCUIT PROTECTION (I.E. AUTOMATIC CIRCUIT BREAKERS) USED TO PROTECT THE VEHICLE LIGHTING SYSTEM MAY NOT PROVIDE ADEQUATE PROTECTION. |
| 07V496000 | 2007-10-23 | trailer hitches:fifth wheel assembly | ON CERTAIN TRUCKS EQUIPPED WITH A SAF HOLLAND SIMPLEX FIFTH WHEEL, THE LEVER ARM PIVOT BOLT MAY HAVE BEEN OVER TIGHTENED. AN OVER TIGHTENED PIVOT BOLT CAN DISTORT THE PIVOT BOLT SPACER SLEEVE, WHICH MAY PREVENT THE FIFTH WHEEL LATCH JAW FROM CLOSING AND LATCHING SECURELY AROUND THE TRAILER KING PIN. |
| 07V345000 | 2007-08-07 | fuel system, diesel | ON CERTAIN TRUCKS, AN UNPROTECTED LEAD IN THE THERMOSWITCH OF THE HEATER MAY MAKE CONTACT WITH ANOTHER POST POSSIBLY CREATING A SHORT CIRCUIT, WHICH CAN RESULT IN CONTINUOUS OPERATION OF THE HEATING ELEMENT. |
| 07V323000 | 2007-07-24 | steering | ON CERTAIN TRUCKS, THE NUT USED TO RETAIN THE STEERING SHAFT MAY OR MAY NOT BE A LOCK NUT THAT HAS THE LOCKING FEATURE. A LOCK NUT IS REQUIRED TO PROVIDE ADDITIONAL RESISTANCE TO ENSURE THAT THE NUT DOES NOT COME LOOSE. |
| 06V385000 | 2006-10-11 | power train:driveline | ON CERTAIN TRUCKS EQUIPPED WITH ARVINMERITOR RPL20 HIGH ANGLE INTERAXLE DRIVESHAFTS, AN IMPROPER SEATED OR MISSING SNAP RING CAN RESULT IN THE BEARING CUP TO SEPARATE FROM THE SLIP YOKE SUB-ASSEMBLY. THE UNIVERSAL JOINT CROSS COULD THEN CONTACT THE SLIP YOKE CASTING AND EVENTUALLY CAUSE THE EAR WORK TO FRACTURE. |
| 06V099000 | 2006-04-04 | steering:gear box:shaft sector | ON CERTAIN HEAVY DUTY CLASS 8 TRUCKS EQUIPPED WITH DANA STEERING SHAFTS, THERE IS A POTENTIAL THAT THE STEERING SHAFT PINCH BOLT HOLE MAY BE INCORRECTLY LOCATED. THE PINCH BOLT FITS INTO A GROOVE IN THE STEERING GEAR INPUT SHAFT TO ENSURE THAT THE STEERING SHAFT DOES NOT SEPARATE FROM THE STEERING GEAR IF THE PINCH... |
Source: NHTSA (US) recall campaigns and owner complaints for this model year.
Engine repair: how we help
For engine work on your 2007 Volvo VT, we arrange a trusted shop; CarmaCars does not do the work. Engine work ranges from a leak to a rebuild; the shop inspects the car and quotes it.
Details the shop needs
Say whether the car is drivable; it changes how it gets to the shop. Note the mileage on the odometer when you send the request. The shop may ask for the VIN to order the right parts.
Who does what
Tell us when suits you, and whether the car can be driven. Send the car's details and what it needs; we take it from there. You agree everything with the shop before work begins.
Your rental while you wait
Add a rental to the same request as the repair. We deliver the rental to you and collect it when your car is ready. Delivery and pickup are both options across the Toronto area.
Between shop visits
Wash the underside of the car in winter to clear road salt. Do not ignore a warning light; an early check often costs less than a late repair. Listen for new noises and mention them to the shop with as much detail as you can.
What to ask
Ask how the shop will contact you if it finds something unexpected. Ask what warranty the shop gives on its parts and labour. Ask whether the shop will check anything related while the car is there.
One more step
Ask, and we tell you plainly what we can arrange.
Request engine repair
Tell us when suits you. A person replies within one business day and arranges it with a trusted shop or recommends one; the shop sets its own price and time.
Rent a car while yours is in in Toronto
We have no car while yours is in on the site right now. Request one and we look for it for your dates, or take a similar car that is available now.
Similar cars available now
Checking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Representative photoChecking tomorrow…
Want this exact car?
Tell us your dates and we look for a car while yours is in for you. Nothing is booked or charged.